Call our team (07) 5404 9354

Where might a tap isolation valve be, and how should I use it?

Follow the visible supply pipes beneath or behind the tap to look for local valves. Mixer taps may have separate hot and cold shut-offs, and not every fixture has one.

To find a tap isolation valve, follow the visible hot and cold supply pipes or flexible hoses beneath or behind the fixture, where safely accessible. Some taps have local valves; others rely on a remote or property shut-off.

Where to look

Check the cupboard below a kitchen sink, the vanity beneath a basin or an accessible service panel. A valve may have a lever, handle or screwdriver slot, but appearance alone does not prove what it controls.

A mixer tap may have separate hot and cold supplies. Both must be isolated to stop water reaching the fixture. Outdoor taps and older installations may not have a nearby local valve.

Trace the connected pipe as far as you can see. Do not reach into a cramped space if you cannot see the valve clearly, or if the area is wet, damaged or unsafe.

How to operate a valve

Only operate a valve you can positively identify as serving that tap, and only if it is in sound condition and turns freely. Move it gently to the closed position without tools or excessive force. If it resists, leaks, is corroded or starts to move the pipe, stop.

If water needs to be stopped urgently and there is no safe local valve, use the known property shut-off only if you can identify and reach it safely. In a unit or shared property, check with the building manager before operating an unidentified valve that may affect another residence.

When the water is isolated, a brief check at the tap can show whether the flow has stopped, but some residual water may drain from the fixture. Keep clear if water is near electrical fittings and do not touch wet switches.

If you cannot find a suitable valve

Do not remove a tap, open a panel, or dismantle pipework to search for a valve. Note the fixture and any visible valve location for the plumber instead. For more context, read how to find the property's main shut-off.

You can also compare symptoms to recognise common tap leaks.

If an isolation point is missing, seized, leaking or uncertain, have it assessed by a licensed plumber. Arrange help through our tap repair service before attempting repair work.