Call our team (07) 5404 9354

What could stop water flowing from a tap?

A dry or weak tap can result from a supply interruption, isolation valve, blocked fitting or mixer fault. Check other taps before arranging a repair.

First check whether one tap has stopped or other fixtures have also lost water. If the whole property is affected, check Unitywater’s current outage information if you are in its service area; the utility says customers should report an outage at their property if it is not already listed. For another service area, contact the relevant water provider.

If only one tap is affected

A local issue may involve an isolation valve, blocked aerator, mixer cartridge or supply connection. Check for any visible damage or recent work, but do not force a valve, dismantle a mixer or alter a pressurised connection. A single tap with no flow while other fixtures work should be assessed by a licensed plumber if the cause is not obvious and safely resolved.

If several taps have weak flow, note whether hot and cold are both affected and whether nearby properties have a similar issue. A property-wide pressure or supply problem may need the water provider; a local fitting fault needs a plumber. See common tap and mixer problems.

Queensland regulated plumbing repairs require an appropriately licensed person. Read what to do about a problem beneath a sink.

Contact our plumbing team if the fault appears local, a leak is present or the cause remains unclear.