Water hammer is a pressure surge that can occur when moving water is stopped or redirected suddenly. It may sound like a bang, knock or rattle after a tap, toilet valve or appliance shuts off. A loose pipe support, worn or sticking tap valve, or trapped air after water-network work can produce similar noise.
Notice when the sound happens
Note which fixture or appliance is running, whether the bang occurs as water starts or stops, and whether more than one outlet is affected. If the noise began after a water outage or planned maintenance, check Unitywater’s advice. Air in the pipes can also make taps gurgle or spit. If the provider identifies recent network work, follow its current instructions for clearing air safely; do not dismantle valves or pipework.
A single light noise may not mean a pipe has failed, but repeated hard impacts can stress joints and fittings. Water hammer arrestors can help in some installations, but the correct device and position depend on the cause and pipe layout. Tightening hidden supports or adding an arrestor without locating the problem may not resolve it.
When to call a plumber
Arrange an inspection if the noise is frequent, severe, getting worse, associated with leaks or occurs after plumbing work. A licensed plumber can check the pressure, valve operation, pipe restraints and any appliance connection, then choose a suitable repair. Contact the water provider if symptoms coincide with network maintenance and affect nearby properties too.
For pressure symptoms, read how to distinguish pressure from flow at home.
For another pressure-control issue, see what a pressure-reducing valve does.
Contact our plumbing team to diagnose recurring pipe noise or water hammer.