Call our team (07) 5404 9354

Why can a hot water system bang, pop or clunk?

The sound may come from connected pipework or the heater itself. Its timing and location help a licensed plumber narrow down the cause.

Banging, popping or clunking near a hot water system can come from water hammer in connected pipework, a valve or pipe moving as it heats, or sediment and scale inside a storage tank. A heat pump can also make normal compressor or fan sounds. The sound alone does not confirm a fault, and causes vary by system type.

Note when the noise happens

Record whether it starts when a tap closes, while water is heating, during a heating cycle or when the unit refills. Note whether the noise is at a fixture, pipe or heater and check for visible leaks without opening covers. Do not adjust gas, electrical, temperature or pressure controls.

Turn off use and seek prompt help if the unit leaks, vents steam, trips power, smells of gas or makes a sudden severe noise. A licensed plumber can inspect water-side valves, pipe supports and the tank; gas or electrical components may need a separately authorised trade. Read how pipe layout can affect water flow and noise.

For water pressure symptoms, see why pressure changes can happen.

Contact our plumbing team if the noise is recurring, worsening or accompanied by a leak.