Call our team (07) 5404 9354

Do 90-degree bends reduce water flow or pressure?

A 90-degree elbow creates a local pressure loss as water changes direction. One elbow rarely explains a whole-house pressure problem by itself.

A 90-degree elbow makes water change direction, which creates additional resistance and a local pressure loss. The effect depends on the fitting type, internal diameter, water velocity and how many bends are in the run. A long-radius bend and a compact elbow do not necessarily behave the same.

Look at the complete pipe run

Pipe length, diameter, material, valves, tees, filters, elevation and the available supply pressure all contribute to delivered flow. Several fittings in a poorly sized or partly restricted line can matter, while a single correctly selected elbow may have little practical effect at a household outlet. Pressure measured at a point is not the same thing as flow rate at a tap.

If a fixture has weak flow, compare other taps and note whether the problem began after plumbing changes. A licensed plumber can measure the system and check for restrictions, leaks, undersized pipe or a supply issue before recommending a reroute. Avoid changing pipework based on a rule of thumb about elbow counts.

For other causes of a pressure change, read what to expect when supply pressure returns.

For regulated pipe changes, see when Queensland plumbing work needs a licensed plumber.

Contact our plumbing team if you want a flow or pressure problem assessed at the property.