Call our team (07) 5404 9354

How do you choose bends for an existing downpipe?

Round and rectangular profiles and different offsets are not interchangeable. Match the fitting to the installed system and required discharge path.

Choose a downpipe bend that matches the existing pipe profile and connection system. Round and rectangular downpipes use different fittings, and nominal sizes can vary between product ranges. A bend that looks close may not seal or fit correctly.

Check the route and outlet

Confirm the pipe shape and measured size, the direction and offset needed, and how the bottom will connect to a lawful stormwater discharge point. A tight bend may not suit the route or cleaning access. The roof, gutter and downpipe must work as a system so rainwater does not discharge against the wall, foundation or neighbouring property.

Use the manufacturer's compatible fittings and installation guidance. If the pipe is high, brittle or near electrical services, do not climb or dismantle it yourself. A change to roof drainage or private stormwater plumbing may need a licensed contractor and should comply with council drainage requirements.

For the broader drainage design issue, read options for managing roof runoff.

Also read what must stay out of stormwater drains.

Contact our plumbing team if the downpipe needs rerouting or its stormwater connection is unclear.