Common tap problems include a steady drip from the spout, water at the handle or spindle, a leak around a swivel spout, dampness at the base, water under the basin or sink, stiff controls and a mixer that is difficult to adjust. The location gives a clue, but it does not always reveal the failed part. Water can travel along the fitting or benchtop before it appears.
Record the pattern safely
Dry the area and note whether water returns when the tap is on, when it is off or only as the sink drains. Check whether the wet area is above or below the bench and whether other fixtures are affected. A spout drip may involve an internal valve or cartridge; a leak below the sink may come from a supply connection, waste fitting or another source. Exact parts depend on the tap model.
Do not force a stiff handle or dismantle a mixer. If a leak is substantial or spreading into a cabinet, avoid using the tap and arrange prompt help. Only close an accessible isolation valve if it is safe and turns without force. Water near electrical equipment needs urgent attention.
Queensland licence boundary
QBCC lists replacing a jumper valve or washer in a tap as unregulated work, but replacing a tap or undertaking broader plumbing repairs is not the same limited task. If the model is unfamiliar, the valve will not isolate or the leak persists, use an appropriately licensed plumber. See how leak timing can help identify a plumbing source.
For a mixer fault, provide the tap brand or model if known. For shower mixer symptoms, see common shower mixer problems.
Contact our plumbing team to assess the leak and confirm whether a repair or replacement is suitable.