You can reduce the chance of returning to water damage by checking visible plumbing, arranging someone to keep an eye on the property and knowing how its water can be isolated. Turning off an identified property valve may limit water loss, but it does not prevent every pipe failure.
Check the property before you leave
- Look over accessible areas: Check beneath sinks, around toilets, laundry appliances and the hot-water unit for moisture, corrosion or a developing leak. Arrange repairs rather than leaving a known fault unattended.
- Check flexible connectors visually: Do not use a hose that is bulging, damaged, leaking or visibly corroded. Have questionable plumbing assessed.
- Identify the correct shut-off: Make sure you know which valve serves your premises. In a unit or strata property, do not operate an unidentified shared valve.
- Plan monitoring: Ask a trusted person to check the home during a longer absence. A leak alarm may provide an early warning where a leak could go unnoticed.
Freezing is less common across much of coastal south-east Queensland, but exposed pipework can be more vulnerable in colder inland or elevated locations. Protect it using suitable materials and instructions for that pipe and site; do not assume insulation makes a damaged pipe safe.
Should you turn off the water?
Closing a positively identified property isolation valve can reduce the volume of mains water available if a downstream pipe fails. Before doing so, check the operating instructions for connected appliances, pumps, irrigation and water treatment equipment. Ask a licensed plumber if the arrangement is unclear.
Do not force a seized, leaking or damaged valve. Do not turn off power or gas to an appliance as a general holiday step. Follow the appliance maker's instructions for any shutdown, and never drain a system unless its manual or a licensed professional directs you to.
Turning off the supply does not empty every pipe, tank or appliance, and a leak can still occur. It is a damage-limitation measure, not a guarantee against damage.
If you find a leak after returning
If water is near electrical equipment, keep clear and do not touch wet switches. If it is safe and you can identify the property valve, isolate the water, then arrange professional help. For a major or uncontrolled emergency, call emergency services.
Read how to locate the property's main water shut-off.
Review the signs of a leaking or burst pipe and how local isolation valves work.
If the valve is difficult to identify or visible plumbing needs attention before you travel, arrange a licensed plumber through our burst-pipe plumbing service.