Call our team (07) 5404 9354

How can you tell whether a water pipe is frozen?

A sudden loss of flow during freezing conditions may suggest ice, but a closed valve, outage or pipe fault can look similar.

A frozen pipe is one possible cause of a tap that suddenly has little or no flow after freezing conditions, especially if other fixtures still work. A supply outage, closed valve, blockage or damaged pipe can cause similar symptoms, so do not treat the sign as a diagnosis.

What to observe

  • Compare hot and cold flow at more than one fixture.
  • Check for a current water outage and ask whether nearby properties have also lost supply.
  • From a safe position, look for frost, bulging, cracks or moisture on visible pipes.
  • Note whether the problem affects one fixture or the whole property.

Frozen water can expand and damage pipework, and a split may only become obvious as the ice thaws, as described in Greater Western Water guidance on frozen pipes. Conditions that can freeze exposed lines vary; see why freezing conditions affect water pipes.

Respond safely

If water is escaping, close a known, accessible isolation valve only if it turns freely. Do not force a stuck valve. Keep away from water near electrical equipment and do not enter a flooded area.

Do not use a flame, boiling water, electrical heater or chemical to thaw a pipe. Do not open walls or attempt to repair concealed or pressurised pipework. If you cannot tell whether a pipe is damaged, leave it alone and call a plumber.

Banging or whistling can have causes other than ice. Read when unusual pipe noise needs a plumber.

If a pipe is cracked, leaking or inaccessible, contact our licensed burst-pipe plumbers for assessment.