Call our team (07) 5404 9354

Why does my shower head keep leaking after use?

A few drops that stop may be water draining from the head. A continuing drip while the control is off can mean water is passing the valve.

A shower head may drip briefly after use as retained water drains. If water keeps dripping from the nozzles while the control is off, the shower valve may not be closing fully. Water leaking at a hose, swivel or wall connection can have a different cause.

Check where the water appears

Dry the visible surfaces and observe whether the drip stops by itself. Do not force the handle or remove the wall plate. A continuing drip from the outlet when the shower is off may need the correct washer or valve component; a leak around a wall fitting could involve a connection behind the wall.

If water is appearing around the handle or cover plate, stop using the shower and read when a leaking shower is unsafe to keep using.

What can an owner do?

Queensland lists replacing a shower head as unregulated plumbing work, as set out in QBCC’s list of unregulated plumbing work. If the head itself is damaged and the existing outlet is sound, follow the product instructions and stop if the fitting is seized, damaged or leaking at the wall. Do not alter concealed pipework or apply tape without knowing how that connection seals.

A drip from the shower outlet may be a tap or mixer fault rather than a faulty head. Tap mechanisms differ, so a cartridge, ceramic headwork or washer is not interchangeable. The guide to common tap and mixer leaks explains why the leak location matters.

Use a licensed plumber if water continues to run, the control will not shut off, the leak reaches a wall or ceiling, or you cannot safely isolate the water. Do not dismantle a pressurised fitting.

For a persistent drip or a leak near the wall, contact our licensed Sunshine Coast shower plumbers to identify the cause.