A flexible sanitary sealant can finish the visible joint between a stable toilet pan and the floor. It does not secure a loose pan or repair a concealed waste connection.
Check the toilet before sealing
Do not seal over movement, a leak, sewer odour or a damp floor. Stop using the toilet if wastewater may be escaping and arrange a licensed plumber to identify the cause first. See what can cause a leak at the toilet base.
If the pan is stable, dry and leak-free, check the toilet maker's installation instructions and the sealant label for compatibility with the pan and floor finish. Selleys describes its wet-area silicone as suitable for bathroom applications; follow the exact product directions.
Prepare and apply the visible bead
- Remove loose dirt and any failed sealant without scratching the pan or floor.
- Make sure both surfaces are clean and completely dry.
- Apply a continuous, neat bead of compatible sanitary sealant where the toilet maker or installer specifies.
- Tool and cure it only as directed by the product manufacturer, keeping the area dry for the stated period.
Whether the joint should be sealed all the way around depends on the toilet installation instructions and local requirements. Do not bridge a gap that should be inspected or use silicone to hide water.
Read how to handle a wet floor after a leak before applying sealant over a previously damp area.
If the pan rocks, leaks or needs refitting, contact our leaking toilet plumbers rather than trying to secure it with silicone.