Water around the bolts beneath a cistern may come from a worn bolt washer or seal, but it can also run down from the inlet connection, flush valve or tank joint and collect at the lowest point. The visible drip does not prove the bolt itself is the source.
Limit damage and note the pattern
Dry the outside and watch whether moisture returns while the cistern fills, after flushing or continuously. If the leak is spreading into the floor or wall, stop using the toilet and arrange help promptly. Close an accessible isolation valve only if it is safe and turns easily. Do not force it, overtighten the bolts or lift the cistern; ceramic can crack and the leak may worsen.
A plumber can inspect the tank, seals and connection, then explain whether repair or replacement is suitable. The scope depends on the suite, parts, access and any damage. Queensland guidance lists only specific washer or rubber replacements inside a cistern as unregulated; general toilet repair or fixture replacement is different regulated work. See how to trace a toilet leak that persists.
For repair-versus-replacement decisions, read when a leaking toilet may need replacement.
Contact our plumbing team if the leak returns, the ceramic is damaged or water is reaching the floor.