There is no universal vinegar soak time for a showerhead. Check the manufacturer's care instructions for the exact model and finish before using vinegar or removing the head.
Start with the finish instructions
Decorative coatings and some metals can be affected by acidic cleaners. If the maker does not confirm that vinegar is suitable, do not soak the showerhead. Use only the cleaning method and contact time specified for that product.
For example, Stylus product care material recommends gentle cleaning for its covered products and warns against abrasive or unsuitable cleaners. That advice is product-specific. Read what may cause a showerhead to leak if the issue is more than surface scale.
If the instructions permit cleaning, avoid prolonged soaking, rinse thoroughly and dry the surface as directed. Stop if the finish changes, dulls or begins to lift. Do not use metal tools or abrasive pads on delicate finishes.
Never mix cleaning products
Do not mix vinegar with bleach or other cleaners. Queensland Health warns against mixing vinegar and bleach because dangerous fumes may result. If they are accidentally combined, leave the area and avoid breathing vapour; call the Poisons Information Centre on 13 11 26 for advice;
If the head remains blocked after its maker's approved cleaning method, it may need attention or replacement. QBCC lists replacing a showerhead as unregulated work, but work on other plumbing components may be regulated. See how wear affects tap and fixture parts.
For ongoing low flow or a leak that persists, contact our plumbing team to check whether the issue is isolated to the head or elsewhere.