Leak detectors can alert you when water reaches a sensor or when a system spots unusual flow, but no type finds every leak or guarantees damage prevention.
Choose by likely leak location, the warning or shut-off function you need, and whether someone can act on an alert.
Spot sensors and sensing cables
A spot sensor sounds an alarm when water reaches its contact points. Place it near a likely leak source and where water can collect.
Some detectors use a sensing cable to cover a longer path. Resideo’s product guide shows one example; only the installed cable area is monitored. Check the alarm, battery and connection requirements.
These sensors warn about water at their placement. They do not monitor the whole plumbing system or identify a leak hidden inside a wall or floor.
Flow monitors and automatic shut-off
An inline monitor observes water use on a supply line and may flag patterns that suggest a leak. Some models can close a valve, while others only send an alert.
Features differ by product. For example, Moen says its Flo system cannot pinpoint the leak location, even though it can alert to unusual use.
Check whether the exact model needs a hub, Wi-Fi or continuous power, and whether its valve can be operated manually. An alert or automatic shut-off is not proof of where water escaped.
A system fitted into the main supply may need changes to fixed pipework. QBCC says regulated plumbing work must be done by an appropriately licensed tradesperson; have a QBCC-licensed plumber assess the installation.
Professional leak location
If water is hidden behind a wall, beneath a floor or outdoors, a household alarm may not reach it. Read how plumbers investigate concealed leaks to understand the next steps.
Professionals may combine moisture readings, thermal imaging, acoustic equipment or plumbing tests. The right method depends on the suspected pipe, building and access.
Thermal cameras show surface temperature patterns; they do not see moisture through walls, and a pattern alone does not prove a leak.
Acoustic tools listen for sound from escaping water in pressurised pipes. Australian water utility acoustic leak-detection research notes that leak size, pipe material and background noise affect the signal. It covers water networks, not a household accuracy test; site conditions still matter.
Choose for your home
- One appliance or cupboard: A spot sensor may suit a local risk if water can reach its contacts.
- A wider floor area: A sensing cable can monitor along its installed route; check that the layout covers the places water could travel.
- Unusual whole-home water use: Compare an inline monitor and check whether the particular model only alerts or can also shut off water.
- A hidden or recurring leak: Arrange a professional assessment. Detectors can flag signs, but they cannot diagnose or repair the source.
Test alarms and connected alerts as the maker directs, and replace batteries or sensors when required. A disconnected, unpowered or poorly placed detector may not warn you.
If water is near electrical equipment, do not touch the affected area. Follow these steps for a water leak near electrics.
If you suspect a concealed pipe leak, contact our leak-detection service to discuss what an assessment can establish for your property.