Call our team (07) 5404 9354

What can make a water pump lose pressure when no leak is visible?

Pressure loss may come from a non-return valve, tank, suction line, control or concealed leak. Do not open or adjust a pressurised pump system.

A water pump can lose pressure without a puddle at the pump. Water may be returning through a leaking check or foot valve, a concealed pipe leak may be present, or the pressure tank, sensor or pump may not be operating correctly. These are possible causes, not a diagnosis from the gauge alone.

Record what the pump is doing

Note whether the pump starts frequently with no tap open, runs continuously, loses prime, makes unusual noise or shows a changing pressure reading. Look for visible moisture around accessible fittings, but do not open a tank, adjust pre-charge, alter switches or work on electrical controls. A small leak can be underground or inside a wall.

Have a pump or plumbing professional check the exact model, pressure tank, non-return valve, suction and discharge lines, controls and water source. Manufacturer troubleshooting is model-specific; a fault in the electrical supply or pump should not be treated as a plumbing adjustment. Read why pressure tank maintenance depends on its model.

For household pressure symptoms, see how to distinguish low supply from a property fault.

Contact our plumbing team if the system loses pressure repeatedly or the pump cycles without water use.