Call our team (07) 5404 9354

Should you choose a 75 or 100 GPD reverse osmosis membrane?

Choose the membrane specified for your system, then compare capacity using its test conditions and actual filtered-water demand.

GPD means gallons per day and describes nominal permeate production under specified test conditions. It is not a promise of the amount your household system will produce each day. Feed pressure, water temperature, incoming water quality, tank pressure, prefilters and flow restrictors all affect output.

Choose for the complete system

A 100 GPD membrane may produce more under comparable conditions than a 75 GPD element, but it is not automatically a better upgrade. Check the RO unit model, membrane dimensions and fittings, product-water quality, compatible flow restrictor and any pump or tank requirements. An incompatible membrane can reduce rejection, waste more water or cause poor system performance.

Manufacturers publish performance at specific pressure, temperature and water conditions. Compare those data for the exact model and make sure the other stages are rated for the change. If the system addresses a drinking-water concern, verify a separate contaminant reduction claim; GPD alone says nothing about water safety.

For apartment and rental system selection, read how to match a filter to the water concern and setting.

For maintenance, see why filter service affects performance.

Contact our plumbing team before changing an RO membrane or connected components.