There is no standard route for gas pipework through every house. A line may run visibly from the meter to an appliance, or be concealed in a wall, floor, ceiling space or underground. Renovations and additions can change the original route. The meter, appliance connection and any available building or gas installation records provide clues, but none proves the exact position of a hidden pipe.
Before drilling or cutting
Do not drill, saw, nail, core, demolish or excavate where a gas pipe may be present. Review plans and records, but treat them as indicative. For work involving ground disturbance, lodge a current Before You Dig Australia enquiry. BYDA says utility plans show the presence and approximate location of underground infrastructure, not its exact location or depth; a skilled locator or asset owner may need to help identify the route.
BYDA plans may not show every private service inside a property. Ask the gas distributor or a licensed gasfitter to identify what belongs to the network and what is private pipework. Depending on the task and materials, a gasfitter may use appropriate locating equipment, access points or system checks. Do not use a magnet, metal detector or electrical tracing device as proof of a safe drilling zone.
For the risks around a suspected damaged pipe, see the guide to living near gas infrastructure.
If you smell gas or hear hissing, use the gas leak safety steps immediately.
What to provide for a locating visit
Give the tradesperson the planned drilling or excavation area, renovation drawings, appliance locations, meter location and any prior service plans. Tell them about recent building work and any known pipe changes. Ask who will obtain utility plans, whether an onsite skilled locator is needed, and what method will confirm the private pipe route before work starts.
For underground network work, the asset owner may require its own approval and safe-work process. A locator mark is not permission to excavate, and a plan does not replace the site-specific controls specified by the asset owner. Keep the information and updated drawings for future work.
Contact our licensed gasfitting team to assess private gas pipework before a renovation, appliance move or planned excavation.