Common toilet problems include a cistern that keeps refilling, weak or incomplete flushing, a blocked pan, water around the base, a slow leak, an overflowing cistern or a toilet that rocks. Similar symptoms can have different causes, from a worn internal component to a blockage or connection fault, so diagnosis matters.
What to note
Notice whether the toilet runs continuously or only after flushing, whether the bowl water rises, whether other drains are slow, and where any moisture appears. If the bowl is rising, stop flushing; repeated flushes can cause an overflow. Keep people away from wastewater and avoid chemical drain products, which can create hazards and may damage plumbing. If sewage is backing up or leaking, arrange urgent plumbing help.
A quiet but persistent refill may waste water and signal an internal fault. Water around the base, movement, cracking or damp flooring needs prompt assessment because continued use may worsen damage. If water is near electrical fittings, avoid the area and seek urgent qualified help. Close an accessible isolation valve only if it is safe and turns easily; do not force it.
Know where DIY ends
In Queensland, regulated work such as repairing or replacing a toilet fixture must be done by an appropriately licensed plumber. QBCC lists only certain small cistern washer repairs as unregulated; the exception is limited and does not cover general toilet repairs. Read how toilet outlet design affects flushing and fit.
For persistent cistern leaks, read how to trace a toilet leak.
Contact our plumbing team if the toilet blocks repeatedly, leaks, overflows, will not stop running or affects other fixtures. Share the symptoms and when they occur so the fault can be assessed safely.