Fit a tap-mounted filter only when the exact model's instructions confirm that your tap is compatible and the connection is intended for user installation. Adaptor sizes and flushing steps vary by product.
Check the product and tap first
Read the filter manual before touching the tap. Confirm the filter model, permitted water temperature, operating pressure and the spout types it supports. Some products attach to a removable threaded aerator; others use a different connection or will not suit pull-out, spray or irregular spouts.
If the instructions allow removal of an external aerator, check whether it loosens by hand using the specified tool or method. Do not use pliers on a finished spout, force a stuck part or remove tap components beyond the maker's stated user steps. If threads do not match or the adaptor sits crooked, stop.
Use the maker's fitting and flush directions
Use only the supplied or approved adaptor and seal. Start the fitting squarely and secure it only as the manual directs. Do not add sealant, tape or improvised washers unless the manufacturer specifies them.
Many filter makers specify cold water and a first flush, but the exact requirements are product-specific. For example, AQVO's tap filter guide applies to its own model and describes its adapters and setup. Do not transfer those steps or specifications to another brand.
Once fitted as directed, run the water as instructed and check the joint for leaks. Stop using it if water escapes, the filter moves or the tap connection appears strained. Do not drink water that the manufacturer says must be flushed first.
When a plumber is needed
If installation requires disconnecting or altering fixed pipework, changing a tap or repairing a leaking fitting, stop and use a QBCC-licensed plumber. Queensland's homeowner plumbing guide limits unlicensed work to listed tasks and says other plumbing work needs an appropriately licensed person.
For a different setup, see whether an under-sink filter suits your needs.
Read how to respond to a leaking filter. If the tap or fixed plumbing needs work, book a qualified installer through our water filter installation service.