Shower drain covers differ. Some are fastened with screws; others are designed to lift or clip out. Check the visible design and the manufacturer's instructions for the installed model. Do not assume that a ring or waste body around the grate should also move.
Moen's product guide shows both screwed-in and snap-in covers for its own shower drains. That is not a universal removal method. If your cover is clearly designed to lift out and releases by hand without force, remove only that cover and clear visible debris. See what can be cleaned at an accessible shower drain opening.
Know where to stop
Do not pry against tiles, cut sealant, unscrew the drain body or rotate a fixed fitting. Stop if the cover is stuck, the tile or floor moves, or removal would disturb a seal, waterproofing or connected plumbing. A cover that cannot be identified is a reason to check the product manual or ask a plumber. The trap also holds a water seal; read why standing water in the trap is normal.
Queensland has a narrow unlicensed-work exception for cleaning or maintaining a ground-level grate for a trap on a sanitary drain. Unblocking sanitary drainage and maintaining or removing plumbing fittings are different work and must be done by a QBCC licensee. Whether a particular shower cover falls within that narrow exception depends on the installation and work involved.
If the shower is slow after visible debris is cleared, do not push a rod or powered tool into concealed pipework. Follow the safe response to a blocked shower drain.
For a cover that will not release safely or a drain that remains blocked, contact our blocked-shower plumbers to inspect the waste without damaging the shower floor.