Hot water maintenance depends on the system type, model and water conditions, so follow the owner manual rather than a universal service interval. Owners can watch for visible changes; internal servicing belongs to qualified people.
Safe checks around the unit
Look for new leaks, corrosion, damaged exposed pipework, unusual discharge or fault messages. Keep the area accessible and do not block ventilation openings or flues.
Do not remove covers, adjust controls or touch wet electrical equipment. Operate a valve only if your model manual identifies it as an owner check and explains how; leave other valve servicing to a qualified person. Hot-water units may contain scalding water, gas, electricity and pressurised components.
Service tasks depend on the model
Storage systems may have a sacrificial anode that protects an enamel-lined cylinder from corrosion. Rinnai's Hotflo electric-storage manual recommends that an authorised person inspect its anode at least every five years. It also notes that water quality can affect which anode is suitable.
That interval applies to the model covered by that manual, not every hot water system. Rheem instructs owners to follow the guide for their product and says maintenance beyond basic owner checks should be handled by an approved plumber.
Continuous-flow, heat-pump and solar systems have different components and service needs. Check the exact model guide for valves, filters, controls, collectors or other serviceable parts, then retain the service record with your warranty documents.
When to arrange professional help
Arrange an assessment for persistent leakage, continuous discharge, no hot water, repeated fault messages or a significant change in performance. A small amount of discharge can be normal for some valves during heating, but the model manual should explain what is expected.
If you smell gas, do not use flames or electrical switches. Move away and follow the gas supplier's emergency advice. Keep clear of wet electrical areas and call emergency services if there is immediate danger.
Check the Rinnai Hotflo owner manual or Rheem troubleshooting guidance only when it matches your product.
Do not attempt repairs or maintenance inside the appliance. Read what to check at handover if the unit was recently replaced. For an inspection, contact our hot water service team.