Call our team (07) 5404 9354

What are the signs an anti-siphon or backflow valve is faulty?

The term anti-siphon may describe different devices. Water escaping, sticking or unusual supply changes should be assessed against the exact fitting and installation.

“Anti-siphon valve” can refer to different fittings, from a small vacuum breaker on an outdoor tap to a testable backflow prevention device. Their warning signs and service requirements are not identical. Water leaking from the body or vent, visible corrosion, damage, failure to shut off or a change after use may indicate a fault, but the fitting needs to be identified before its behaviour can be judged.

Do not cap or bypass it

Take a photo and note where the device is installed and when water appears. Do not block a discharge opening, remove the device or fit a replacement based on appearance. A backflow device protects the water supply from contamination; bypassing it can create a health risk. A licensed plumber can identify its type and whether it needs repair or replacement.

In Queensland, testing, commissioning or maintaining testable backflow prevention devices requires the relevant QBCC endorsement. Read how to distinguish a fitting fault from a water meter issue.

For broader plumbing warning signs, see when a plumbing problem needs urgent attention.

Contact our plumbing team with a photo and the device location so its service needs can be confirmed.