Call our team (07) 5404 9354

Can an undermount sink come loose or fall?

An undermount sink can detach, but there is no reliable figure for how often it happens across different products and installations. Movement is a warning to stop using it.

An undermount sink can come loose if its support or connection to the benchtop fails. There is no reliable frequency figure that applies across different sink models, materials and installation methods.

Oliveri's installation instructions say the benchtop supplier determines the support method for the specified product and that plumbing connections should be made by a licensed plumber. Those instructions are product-specific; follow the actual sink and benchtop requirements.

What can make a sink detach?

Possible contributors include an unsuitable or deteriorated fixing method, missing support, moisture damage around the benchtop, movement or excess load. Sealant may keep a joint water-resistant, but should not be assumed to be the structural support.

Look for movement, a widening gap, sagging, cracking, separating sealant or water below the bowl. Water under the sink can have other causes too.

What should you do?

  • Stop using, filling or loading a sink that moves.
  • Keep clear if it appears unstable; do not work underneath or try to prop it up.
  • If there is a leak, close a known, accessible isolation valve only if it is safe to reach.
  • Do not remove the waste, pipework, brackets or sealant to investigate.

An installer or benchtop specialist may need to assess the support and worktop. A plumber can make leaking supply or waste connections safe and complete any plumbing work required. Read what can cause a leak around a sink drain if moisture appears only when the sink empties.

If the sink is moving or leaking, contact our plumbing team to assess the connections and help identify the right specialist for the mounting system.