Start with drainage plans and records for the property, then compare them with visible gutters, downpipes, grates, pits and outlets. These clues can suggest the stormwater route but do not confirm the location or condition of every buried pipe. Do not dig to check a suspected route.
On the Sunshine Coast, Council's plumbing search may provide an as-constructed drainage plan within the property boundary where available. Council's separate stormwater search and MyMaps show information for known council-owned infrastructure. For other areas, ask the relevant council what property records it holds. See how stormwater differs from household sewer drainage.
Check records and visible clues
- Look for the property's original or renovation plans and any drainage plans handed over by previous owners.
- Trace roof gutters and downpipes to ground-level inlets, pits and visible discharge points. Note where paved-area grates appear to lead.
- Request the appropriate council drainage or as-constructed search. Confirm whether the plan covers council-owned infrastructure or internal property drainage.
- Compare the records with what is visible on site, but treat any mismatch as unresolved rather than guessing where the pipe runs.
Plans may be incomplete if work was changed, undocumented or not approved. Before excavation, request plans through Before You Dig Australia and follow the affected asset owners' instructions. BYDA plans are indicative, may not show all private or domestic connections, and do not mark the exact position of assets. A locator can help confirm a route before ground is disturbed.
Do not enter a pit or culvert, reach into a drain or lift a heavy cover. If a stormwater inlet is overflowing or blocked, read what can cause stormwater drains to block and leave concealed drainage work to a licensed professional.
If records and visual checks do not locate a private stormwater line, contact our stormwater plumbing team for a non-destructive assessment before landscaping or excavation.