Weak flow at several cold-water outlets can point to a restriction in the property supply, but it does not confirm one. A utility interruption, partly closed valve, leak, filter or local fixture fault can look similar.
Compare the symptoms
Check a few ordinary cold taps around the property and note whether the change is sudden or gradual. If only one outlet is affected, its aerator, cartridge or branch pipe is more likely than the incoming main.
If several cold outlets are weak, the cause may be further upstream. Weak hot and cold flow can also suggest a wider supply issue. If cold flow is normal but hot flow is reduced, the hot-water equipment or its pipework may be involved.
Discoloured water or particles can have several causes and do not prove a blocked supply line. Follow your water provider's current advice if water quality has changed.
Safe checks you can make
- Check the pattern: Compare taps without removing fittings or opening pipework.
- Look for a safe, visible leak: Damp ground, pooling or unexplained water use may justify prompt assessment. Do not dig or open concealed plumbing.
- Check an accessible valve only if you know what it serves: Do not force a stuck, damaged or leaking valve, or interfere with utility equipment.
- Check for a network interruption: Use the outage and fault information for the provider serving your address.
In Unitywater's service area, its water-pressure guidance describes a bucket test at the tap nearest the meter as an initial indicator. It does not diagnose a property fault, and it should only be used where the tap and meter are safely accessible. Contact the provider if its test or current outage guidance points to a network concern.
When to arrange a plumbing assessment
A plumber can check whether the restriction is in private pipework, a filter, a valve or another part of the property system. Keep a note of which outlets are affected and whether the issue changes over time.
For a separate fixture issue, see how to identify your tap model when arranging a quote.
If flow is weak throughout the home, compare the checks for low household water pressure.
Review whole-house filter maintenance if a filter is installed.
If the provider rules out a network issue and multiple outlets remain affected, arrange a licensed assessment through our water pressure plumbing service. Sudden loss of supply, visible leakage or pipe damage should be addressed promptly.